how to install twrp recovery and root in xiaomi redmi mi k20pro/9t pro

Remember Bootloader unlocked ( http://android-device-rooter.blogspot.com/2020/03/how-to-install-twrp-and-root-redmi-k20.html )

How to install TWRP recovery and root in xiaomi Redmi k20

• First Prerequired 
  
• Make sure you have unlocked the bootloader of Redmi K20 Pro.
  
• Download ADB and Fastboot Drivers on PC.
• Download TWRP recovery image.
• Download Chainfire’s SuperSu
• Backup important data on your PC or any external media.
• You need a Laptop or PC.
• Ensure to keep at least 50% battery.

Let's Get Started

Steps to install TWRP on Redmi K20 Pro

Follow the steps below carefully, as missing any step would result in damaging the phone.

1. Extract ADB tools in a folder.
2. Download TWRP and move it into the extracted TWRP folder.
3. Now, Enable Developer Mode option by heading to the Settings>About Phone>Build Number and tap it 7 times to enable developer option.
4. Enable USB Debugging mode by heading to the Settings>Develper Option>Enable Debugging mode.
5. Open command prompt in the extracted TWRP folder by pressing Shift + Right Click on the mouse.
   
6. Power off the device and then boot your device into the fastboot mode by pressing the power + volume up button simultaneously.
7. Connect your device with PC via USB cable.
8. Verify the device’s connectivity status by executing the command below:

   adb devices

9. Type the command below to reboot into bootloader:

   fastboot reboot bootloader

10. Once into the bootloader mode, flash the TWRP by the following command. (Note: Replace the TWRP.img with the name of recovery).

    fastboot flash twrp.img

11. Once the installation is completed. You can type the command to reboot your device by typing:

    fastboot reboot

You have successfully flashed TWRP recovery on your device. Now, proceed with the below steps to root Redmi K20 Pro.

Steps to Root Redmi K20 Pro with SuperSu

SuperSu is a zip file by chainfire which allows users to gain root access. To flash it on the Redmi K20 Pro, follow the procedure below:

1. Download the latest SuperSu zip on your Phone, and then move it to the rot of the device.
2. Power off the Redmi K20 and then hold volume up + power button simultaneously to boot into the recovery.
3. Once in the TWRP recovery, press ‘Install‘ and then browse the SuperSu file.
   
4. Now flash the SuperSu zip after swiping the slider below.
5. After flashing, reboot your device and enjoy.

We hope you have successfully rooted the Xiaomi Redmi K20. If you have any issue or problem while performing the procedure above, then let us know via comments below.

hope this guide was helpful to install twrp and root process . If you have any queries or feedback, please leave a comment below.
• (like,share,comment)
  THANKS FOR (VISITING)